It took three years and hundreds of thousands of dollars to engineer, but the TAT International Power Palette™ color changer is finally here, and its turning heads. Since the airbrush tattoo industry sprung up, the only way to give tats with more than one color was to buy many guns and many inks, not to mention many accessories like hoses, manifolds and gun clamps. Tat Store saw a problem with that model and began working on a solution, the Power Palette.

More Colors

The Power Palette requires only one gun and only seven inks to produce an entire rainbow of colors and shades. It also is the only way to effortlessly blend colors for more complex tats. You access colors by simply turning a dial on the gun with your finger tips. You can mix and blend adjacent colors to create new colors by turning this dial. If you were doing a flame tat for example, you could create it faster because the yellow would automatically change to shades of darker yellow, light orange, orange, dark orange, light red, etc. The Power Palette allows you to blend colors faster, easier.

Less Waste

Whenever you finish spraying a color, there is always a residual amount of ink deposited on the needle inside the airbrush gun. With a multi-gun operation this ink is wasted. It dries on the needle while the gun is not in use. Because the Palette uses one gun, often this ink is not wasted. If you were spraying a flame tat, for example, you would first dial in yellow, then red, then blue. No residual amount of yellow or red ink would be wasted.

Additionally, the Power Palette will prevent ink from drying up or changing consistency. Most airbrush tattoo ink is alcohol based and will evaporate if left in the gun. With the Power Palette however, you will never have this problem because of its innovative air tight design that eliminates the need for a breathing hole in the paint bottle. Because the Palette is air-tight, you store ink/paint in the Palette for days, even weeks without concern.

Save Time

With every multi-gun system, a new layer of ink dries in the tip every time the gun is used. These layers tend to cake up during the day. If you are lucky enough to make it to the end of the day without your gun clogging, you still have to disassemble, clean, and reassemble each one of your multi-guns before re-use. This is a laborious, time consuming, and tedious task. Not to mention being a daily recurring expense in time and materials.

If you were using the Power Palette, however, you could just set your gun down at day's end because the Palette is self cleaning. No ink ever dries on the tip of the gun. If the last color used at the end of the day is red, for example, you turn the dial to the stop, pull back on the trigger, and flush it clean all within a second or two.... no disassembly, cleaning, or reassembly of even one gun. The next time you use your Power Palette, your gun is ready, just pick it up, point, and spray.

Includes:

• Innovative Power Palette Color Changer
• 7 ink bottles with caps
• 1 cleaning solution bottle with cap
• Power Palette Hose

Learn More: Videos